Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White
(239 reviews)
Price: $57.95
In Stock
Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White
Item # 344270KITW
Our Price: $57.95
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (239)
- Q & A (0)
- Photos
LaSalle Bristol Accessories and Parts - 344270KITW
- RV Vents and Fans
- Vent Install Kit
- LaSalle Bristol
Roof vent install kit allows you to properly mount your RV roof vent and create a waterproof seal. Kit includes 2 tubes of self-leveling sealant, 1 roll of butyl tape, 8 wood screws, and 30 sheet metal screws.
Features:
- Installation kit includes everything you need to mount your RV roof vent with a waterproof seal
- Works on surfaces such as aluminum, brass, steel, glass, mortar, wood, PVC, EPDM, TPO, and TPV
- Pre-formed, synthetic polymer butyl tape remains flexible for years
- Adhesion improves with age
- Weather-resistant, paintable sealant is self-leveling for horizontal surfaces
- No primer required
- White color
- Kit includes:
- (2) 10.1 oz tubes of sealant
- (1) 30' Roll of butyl tape
- (8) #8 x 3/4" wood screws
- (30) #8 x 3/4" sheet metal screws
344270KITW Roof Vent Installation Kit - RV Roof Membrane - Sealant, Butyl Tape, Screws - White
31071 Zinc Sheet Metal Screw - 8 x 3/4" Indented Hex Washer Head - Hex Slotted Drive
30587 Wood Screw - 8 x 3/4" Slotted Round Head
270341410B LaSalle Bristol XTRM Butyl Tape - 30' Long x 3/4" Wide - Qty 1
27034145 LaSalleBristol XTRM Universal Self-Leveling Sealant - 10.1 oz - White - Qty 24
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White - 344270KITW
Average Customer Rating: 4.6 out of 5 stars (239 Customer Reviews)
Roof vent install kit allows you to properly mount your RV roof vent and create a waterproof seal. Kit includes 2 tubes of self-leveling sealant, 1 roll of butyl tape, 8 wood screws, and 30 sheet metal screws.by: Randy M.01/04/2024
It’s been one year (1/4/23) since I purchased and installed these products on my 1994 Airstream Trailer. The complete kit was more than adequate for my job given that the trailer had a few other areas requiring attention or needing the self-leveling sealer. I waited for the ideal conditions (weather, temperature, and time of day) before applying the parts and sealing a few other external components. We’ve had several rain events and temperature swings and these products have held up very well. The trailer serves more as an office now which increases the importance for not having leaks!
This was a great choice to select these projects and particularly, from this vendor. They were very responsive and quick to get the order out.
Thanks to George and his Team!
Happy New Year 2024
by: Keith05/30/2024
Always pretty satisfied with etrailer. The only reason I didn't give a 5 star this time is the butyl tape was smashed because of the way it was packed for shipping. The product otherwise arrived in good condition upon initial inspection. I haven't installed the fan yet so can't yet speak to function.
by: Gary05/09/2023
I bought this kit to make my roof vent install water tight. The butyl tape and self leveling sealant were exactly what was needed. The kit comes with two sets of screws (which weren’t included with the roof vent), however I didn’t use them as one set was slotted (flathead vice Phillips) and the other (better) were hex head/slotted. I prefer Robertson (square drive) screws and that is what is stock on this trailer so that’s what I used. I would have given 5 stars if the screws that came with the kit were better quality (i.e. weren’t slotted). Regardless, there is no doubt it is water tight. Good kit.
by: Thalia05/15/2024
This kit was not put together in a box. The screws were literally thrown in a very large box and so were the other 2 items. One nozzle of the caulking was bent, and if used the caulking would have come out near the tube itself. We were supposed to get 30 metal screws and 8 wood screws. We were missing some of both. Not a happy camper. I called the company and more of what we needed were being sent out. We shall see.
by: Troy 11/20/2023
Exactly what I needed. Replaced roof vent on my 1964 Shasta and the self leveling sealant worked just as described. I applied it when temperatures were in the 50s and nights got down to the 30s so it took a couple days to dry. I’ve had no issues at all.
by: Jason05/20/2024
Shipment showed up with Staples all over the entire box, for no reason, stabling the goods on the inside to which some were cloth goods
by: Gary08/26/2023
I gave this order 3 stars because whoever shipped this order put the vent and the installation kit in the same box. The roll of tape was damaged, but I think everything else look okay. I have read other reviews saying the same things I encountered happening and somebody is not paying attention to these reviews. Also the plastic piece of the vent should of been packaged better as they were laid in there to flop around. I am surprised that nothing else was damageed. etrailer is better than this I would think.
Jenny N.
8/31/2023
We always take reviews about the packaging seriously. I will have our Customer Service team reach out to you.
by: Jason12/14/2023
The screen that snaps into place does not stay attached very well. Upon further investigation one of the plastic snaps was broken, but it was to late to return it as I had already mounted the unit on the trailer. However the kit was great. My trailer will now seal correctly. Thank you.
by: Glenn 02/20/2024
The items arrived unscathed and in good shape. Waiting for the weather to warm a little to make the install. I removed the old vent and it matches the dimensions of this unit, so the install should be easy. Metal lid should last a lot longer than the plastic ones.
by: John09/08/2023
Used to seal the replacement roof vent (old one was damaged from tornado). Followed instructions. Took our time and installation went well in 73 Deg weather. After a year, sealant is still good. (Trailer is stored under open sided shelter).
by: David 03/15/2024
Everything was perfect! Very efficient service! Im vey pleased with the quality of what I ordered. I would most definitely order again from trailer. Thank you again for the fast delivery.
by: Jorge 11/03/2023
What I'd like to know is how ETrailer got my Roof Vent stuff to me so quickly. Not only that, but I get a note right after I ordered referencing a prior order (for the same thing...different trailer) and I'm saying to myself, "These folks take customer service to another level." Everything ordered was in the box and delivered intact.
by: Carl05/17/2023
1Here are some pics of the way my order was recieved
Jenny N.
5/22/2023
It does look a bit rough around the edges. I will have our Customer Service team reach out to make sure that the kit was not damaged.
by: Mark,01/18/2024
Terrible packaging. The shipper thru everything on top of the Vent damaging the screen.
by: Chris06/06/2024
Excellent service. There was a small issue with one of my items and it was rectified quickly.
by: Judi06/04/2023
the sealants were damaged the tape was fine, so I had to go to a hardware store to purchase two sealants luckily they sold same brand. But this is not etrailers fault I blame the transportation of it. I am more than pleased with etrailer and all the products we have purchased from you. your customer service is amazing! the knowledge of the staff is far beyond any other company.
Katrina B.
6/8/2023
Oh no! Lets get you over to our customer service department for them to get you some type of reimbursement.
by: Andrew03/06/2024
I watched some videos before doing this so I was ready. The job was straightforward and materials provided worked exactly as advertised. The sealant in particular flowed right where I expected it to. Good job on this folks.
by: Ian 04/14/2024
This kit comes with with enough for four root vents. One installed one vent but saving the rest for next time.
by: Marty05/24/2024
Well packaged, quality product, quick delivery, good prices....what's not to like?
by: Cindy05/04/2023
The roll of butyl tape I received was twisted and bent. I had enough to complete my job but had to throw about half of it away. I'm not sure on the sealant. After 7 hours it is still very, very, soft. (I don't know if that is normal). The mounting screws have slotted heads. Be much better if they were phillips-I ended up replacing the slotted screws with phillips.
Jenny N.
5/12/2023
I am sorry that the butyl tape arrived like that. I will have Customer Service reach out to you. The sealant should cure in an hour however if it is still soft then wait 24 hours if you plan to paint it.
by: Daryl08/15/2023
This kit is mostly complete. The only thing missing is a guy to get up on the roof of my camper who can use a heat gun to soften all of the old sealant and yank out the old vent. Seriously, the kit has everything I’ll need to install the new vent.
by: Paul 10/14/2023
Fan as described. Installed with help of on line customer videos. Works well. Butyl tape arrived nearly folded in half but it worked ok.
by: Thomas 05/07/2024
Thanks for getting here quickly will install when we have a few days of no reason.
by: Rob 04/15/2024
Worked great!
by: James03/20/2024
Easy to work with and a quality product.
25
239
Show More Reviews
See what our Experts say about this LaSalle Bristol Accessories and Parts
- Could MaxxFan Deluxe Roof Vent # MA00-07500K Fit 2018 Ram PromasterThe MaxxFan Deluxe Roof Vent # MA00-07500K will fit your 2018 Ram Promaster as it basically can fit any vehicle or trailer as long as you are willing to cut a 14 inch square hole in the roof of it. I attached an install video for this kit that shows how it installs. For an install kit for use with this vent assembly you can use the part # # 344270KITW which comes with sealant and install screws.
view full answer... - Trailer Roof Vent Availability for a Pace TrailerMost likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
view full answer... - Is There a 14 Inch Trailer Roof Vent Which Installs On a 1 Inch Thick RoofYes, we do offer a roof vent fan which can be installed on a roof 1" thick, it's the MaxxAir MaxxFan Mini Roof Vent part # MA00-04301M for white or part # MA00-04401M for smoke. These units have an electric fan with multiple speed settings, manual lift lid operation, and come equipped with a two-year warranty. They install into an existing 14" x 14" or 14-1/4" x 14-1/4" opening. I also recommend picking up the Roof Vent Installation Kit part # 344270KITW to complete your install.
view full answer... - Replacement Roof Vent For RV Refrigerator On a 1999 Shasta Sprite MotorhomeIt sounds like you are looking for the Camco RV Refrigerator Vent Cover in Black # CAM42163 or White # CAM42160. This cover fits over a Dometic or Norcold refrigerator roof vent. We do have the Base in White # CAM42161 or Black # CAM42164 as well if that portion of the vent is also damaged. The overall dimensions of the base are 26-1/4" long x 7-3/8" wide x 1-3/4" tall to work with either roof vent opening. The Roof Vent Installation Kit # 344270KITW will be needed if you are replacing...
view full answer... - Replacement Fan-Tastic Vent Roof Vent With RemoteThe Fan-Tastic Vent 3350 Series Upgrade Kit - Off White # FV803358 is not able to utilize the wireless remote. I reached out to the manufacturer and they said the wireless remotes are only able to function with the complete assemblies that included them. To get that option, you will need to replace the entire unit with the Fan-Tastic Vent Roof Vent w/ 12V Fan and Remote - Powered Lift - 14-1/4" x 14-1/4" # FV807350. This assembly will fit in the exact same location as the one you replace...
view full answer... - Replacement Vent For Fan-Tastic Vent Model 4000BTYes, it looks like your existing Fan-Tastic Fan model 4000BT is a standard 14" wide x 14" long roof vent so the MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat part # MA00-05100K would fit the opening for your old vent as long as the roof is 1-1/8" to 6-1/2" thick. I have attached an installation video for your reference. I recommend using the Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White # 344270KITW which will give you the sealant and screws needed.
view full answer... - Replacement Roof Vent Covers for 2004 Fleetwood Prowler Travel TrailerIn order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on...
view full answer... - Fan-Tastic Roof Vent with Motor and Dome for 14 x 14 Trailer Roof OpeningFan-Tastic Vent part # FV807357 is a partial unassembled upgrade kit but we do have complete fully-assembled powered vents like this that will fit the same standard 14-1/4 x 14-1/4 RV roof vent opening. This kit is compatible with many but not all Fan-Tastic Vent models so it will be helpful to tell me the model number of your vent which you'll find on the motor. Please refer to the linked page to see all complete 12V powered vents like the Fan-Tastic Vent # FV807350. This USA-made unit...
view full answer... - How Does Trailer Roof Vent with Metal Lid Install on Roof of CamperThe Replacement Dome Assembly # BV0534-00 that you referenced is just a replacement lid for a roof vent. It attaches to the hinge of a roof vent and to the operator arm which raises and lowers it. For the entire assembly that uses this lid you'd want the part # V2110SP-24 which to install it you'd want the kit part # 344270KITW that comes with screws to attach it to your trailer roof and also sealant to make it water proof. I attached an install video for this kit that shows what it comes...
view full answer... - Will Ventline Roof Vent/Fan Fit a 2004 Jayco EagleYou will be able to use Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - White Item # V3094-601-00 on your 2004 Jayco Eagle as long as the existing hole for a vent is roughly 14-1/4 inches square. If your opening is a different measurement let me know. The vent does not come with installation hardware so I also recommend# 344270KITW for an installation kit. I have linked some videos of these parts for you.
view full answer...
- Replacement Roof Vent to Fit a 1989 A Liner CamperRoof vents for campers are not trailer specific, but are fitted by the size of the opening that is in the campers roof. The most common opening size for roof vents is 14-1/4 x 14-1/4 inches and 2-1/8 inches deep. If these dimensions match the opening on your camper, then the Ventline Ventadome Roof Vent, # V2092SP-28, that you referenced will work for your 1989 A Liner. I you will also need # 344270KITW installation kit to install the vent on your camper. The kit includes sealant and hardware...
view full answer... - Roof Vent Replacement for 1993 ProwlerIn order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on...
view full answer...
- Can Existing Holes from Old Vent Assembly be Used for Hardware to Install Fan-Tastic Roof VentAs long as the holes where the existing screws are at are in good shape and they aren't too big for the recommended #8 screws that come in the installation kit # 344270KITW there should be no problem in using the same holes to install the Fan-Tastic Vent Roof Vent # FV801208.
view full answer... - Will the Fan-Tastic Vent Roof Vent Assembly Upgrade Kit Work On a Dometic UnitI do have an option for you but you can't simply replace the insides of a roof vent fan with parts from another manufacturer, they aren't standardized like this. If you're interested in Fansatic Vent, I recommend the Fan-Tastic Vent Roof Vent part # FV807350, you'll also need the Roof Vent Installation Kit part # 344270KITW. This option does require you to break the seal but the cutout size will be the same and if your old unit has a fan, the wires will already be run so it's really not...
view full answer... - Replacement Roof Vent for 1992 Palomino Filly Pop-Up CamperWe have many types of trailer roof vents and vent parts but we do not have a way to look up the vent originally installed in your 1992 Palomino Filly so I suggest confirming the dimensions. Most often square roof vents are 14 x 14-inches and fit roof openings that are generally 14-1/4 x 14-1/4. Based on photos of your pop-up that I could find it appears you do have a 14 x 14 vent so I linked for you our entire range of trailer vents in this size. We have manual vents, 12V powered vents...
view full answer... - Install Kit Recommendation for Fan-Tastic Vent Roof Vent FV801250For an install kit that comes with sealant to use with the Fan-Tastic Vent Roof Vent # FV801250 that you referenced we offer the # 344270KITW which comes with fasteners and a urethane sealant.
view full answer... - How to Determine Which Trailer Roof Vent Cover will Fit a TrailerIn order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on...
view full answer...
- Need Replacement Roof Vents for a SunyBrook Titan 38BQS TrailerThe size of most roof vents on campers measure at 14-1/4 x 14-1/4 inches. This measurement is the length and width of the vent. The part you referenced # BV0554-03 may be the correct size, but there are different styles of hinges that you will need to know before purchasing. There are 3-point hinges, 4-point hinges, and continuous hinges. Cover # BV0554-03 fits 14-1/4 square roof vents and has a continuous hinge. Unfortunately, there is not a master parts list where I can look up your...
view full answer...
- Roof Vent Install Kit Recommendation for RV with Fiberglass RoofSince you have a fiberglass roof the RV roof vent install kit you'd want is the part # 344270KITW. The Butyl tape kit you mentioned # CAM25013 is for use with rubber roofs or sidewalls so it would not work for you.
view full answer... - Install Kit for Trailer Roof Vent The install kit you mentioned is no longer available but we do have the LaSalle Bristol Kit # 344270KITW in White or # 344270KITB in Beige that will give you everything needed to install the Ventline Ventadome Roof Vent # V2092SP-29 that you were looking at. This kit includes two 10.1 oz tubes of sealant, a 60 foot roll of butyl tape, 8 wood screws, and 30 sheet metal screws. I have attached a sample install video that you can also check out.
view full answer... - Can The Airflow Be Reversed On A Fan-Tastic Vent RV Roof Vent 6300 Series The Fan-Tastic Vent 6300 series has a remote with an "air out / air in" button that will allow you to reverse the fan direction. If you're looking at purchasing a vent then sadly the 6300 has been discontinued but there are newer models available with a reversible airflow option like the # FV802250. This vent has the same option on the remote as well as a switch on the vent that will allow you to reverse the airflow. If you're installing this yourself you'll want to pick up the installation...
view full answer...
- Replacement Vent or Vent Parts for a 1968 Serro Scotty TrailerWithout knowing the exact model used in your vintage trailer, you will have to go by the size of the opening and the roof thickness to choose a replacement vent. The vents that we carry will fit in a 14-1/4 inch square cut out in the roof. A vent like # V2092SP-28, includes a garnish that fits roofs 1-7/8 to 3 inches thick. Other garnishes for thicker roofs are available. I have included a link to a video review of this vent for you. The roof vent isntallation kit, # 344270KITW, is recommended. It...
view full answer... - Replacement Roof Vent Lid to Fit Multiple Tab Hinge for Older Horse TrailerThanks for the photos, Charlotte! The replacement lid you're looking for is the Camco Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge # CAM40147. This is designed for standard 14" x 14" vent covers which you actually have. The 14" measurement is taken from the opening up above which is why your measurements are slightly different. If you wanted to upgrade to a newer vent that is completely possible and you won't have to modify the hole in your roof. For a standard replacement...
view full answer... - Replacement Vent Cover Recommendation for a 2000 Sundowner Trailer Valuelite 2 Horse TrailerMost likely we have what you are looking for but you will need to first determine what vent style you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jameson C
Video by:
Kathleen M
Video by:
Michael B
Video Edited:
Chris R
Updated by:
Mary K
Updated by:
Wilson B
Edited by:
Amanda M
Test Fit:
Shane H
Installed by:
Robert C
Written by:
Halie H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
5/22/2024
I am sorry that this happened. We do use staples with our boxes so I will let our shipping department know. In the meantime we will reach out to you and make sure to replace any items that were damaged.